Diese Seite mit anderen teilen ...

Informationen zum Thema:
Forum:
WinDev Forum
Beiträge im Thema:
1
Erster Beitrag:
vor 2 Monaten, 3 Wochen
Beteiligte Autoren:
Donald Montaine

More on installing a 64 bit Debian Jessie App Server

Startbeitrag von Donald Montaine am 21.09.2017 06:51

# You need to be comfortable with Linux. This is not a tutorial but a brief script to save other people the hours of time I put in researching this.
# These suggestions come from the PCSoft documentation, some discoveries I made during my many, many install attempts and a prior post in this forum by Mr Black
# My previous post would get an App Server installed, but deployment did not work
# With these additional instructions, you will be able to deploy and run a web site
# Console commands are in Blue
# For this installation I used bunsenlabs linux (www.bunsenlabs.org)
# It allows installation of a pre-configured LAMP server during the post installation script. And was the one version of Debian Jessie that allowed a successful install
# you may need Winscp and Putty on your Windows computer

-----------------------------------
# Once Linux is installed -
Login using the username and password you selected during installation
# the post installation script will assure that all updates are applied

# download and install Webmin from www.webmin.com (you really need this) using the web browser in bunsenlabs linux
# once webmin is downloaded you can install with
# dpkg -i webmin* (which will fail) then apt-get -f install which will load the required dependencies and install webmin
# open a terminal session
sudo su
apt install vsftpd libqtcore4 libqtgui4 libc6-dev libstdc++-4.9-dev zlib1g-dev ttf-mscorefonts-installer
nano /etc/vsftpd.conf

# uncomment "write_enabled=YES"
# uncomment "local_umask=022"
# cntl-O to save
# cntl-X to exit
------------------------------------------------
# Upload the following files to your Documents folder folder using WinScp
# WEBDEV_Install.zip
# webdev_install_test64
# mantainstall.zip
# manta_install64
-------------------------------------------------
cd /home/_your_login_account/Documents
chmod +x *64
./webdev_install_test64

# dialog 1 - scroll down and accept license agreement
# dialog 2 - all prerequisites should be installed so just select "Next >"
# dialog 3 - accept default setup directory
# dialog 4 - no changes necessary, select "Next >" unless you want to host sites
made with a version prior to 22, then change as appropriate
# dialog 5 - accept "webdevadmin" as the user and group for managing the sites, select "Next >"
# dialog 6 - select "Yes"
# dialog 7 - select "Yes"
# dialog 8 - select "Yes"

usermod -a -G webdevadmin www-data
usermod -a -G root www-data


#now run this command a second time and choose "Upgrade"
./webdev_install_test64
------------------------------------------------------------
cd /etc/apache2/mods-enabled
ln -s ../mods-available/actions.load ./actions.load
ln -s ../mods-available/actions.conf ./actions.conf
ln -s ../mods-available/cgi.load ./cgi.load
reboot


# after the system boots, login again
# using webmin in the browser enter https://localhost:10000 as the URL
# in the menus and tabs choose "Servers, Apache Webserver, Global Configuration, Configure Apache Modules"
# make sure the Actions and CGI modules are checked ( and leave all existing checked modules checked) and then click the "Enable Selected Modules" button at the bottom of the page
# Log out of Webmin
# Enter http://localhost/WDAdminWeb220 and login as Admin
# Create a WebDev account using the same name and password as your Linux login
# Make the account a WebDev administrator (optional)
# Change the Maximum number of connections for all sites of this account to a value
# other than zero
# Set the Directory for FTP transfer to " /home/_your_login_account/ftp_webdev"

# now open a terminal

sudo su
cd /home/_your_login_/Documents
./manta_install64

# dialog 1 - scroll down and accept license agreement
# dialog 2 - accept default setup directory
# dialog 3 - accept or change server name but keep other settings
# dialog 4 - accept or decline

# run the following commands for your login account
# (Note: the following commands should also be used for any new linux
# account you create replacing the references to _your_login_account
# with the newly created account name
# also make sure you create a matching Webdev account for each new
# account you create)
>usermod -a -G _your_login_account www-data
>mkdir /home/_your_login_account/data
>mkdir /home/_your_login_account/site
>mkdir /home/_your_login_account/ftp_webdev
>mkdir /home/_your_login_account/webserviceREST
>mkdir /home/_your_login_account/webserviceSOAP


# You will now be able to deploy a site using your login account as the ftp account and the same account name as your WebDev account.

--------------------------------------------------------------
# to Manage WebDev go to "http://[your server URL]/WDAdminWeb220 - Login: ADMIN Password: admin
# to Manage HFSQL go to "http://[your server URL]/WDAdminHF220 - Login: ADMIN Password:
# to Manage SAAS go to "http://[your server URL]/WDAdminSaaS220 - Login: ADMIN Password: admin
# Note: you can also use the Windows based HFSQL Control Center to manage the HFSQL server

Antworten:

Zur Information:
MySnip.de hat keinen Einfluss auf die Inhalte der Beiträge. Bitte kontaktieren Sie den Administrator des Forums bei Problemen oder Löschforderungen über die Kontaktseite.
Falls die Kontaktaufnahme mit dem Administrator des Forums fehlschlägt, kontaktieren Sie uns bitte über die in unserem Impressum angegebenen Daten.